Drying plastic raw material is a critical step to maintain product quality and increase production efficiency. Selecting the wrong drying time and temperature inevitably leads to moisture-related defects and equipment failures.
1. How to Calculate Drying Time?
The moisture content of plastic granules varies according to the type of resin and storage conditions. As a rule of thumb, moisture above 0.2 % can cause production defects. Follow these steps to determine the proper drying time:
- Moisture Analysis: Measure sample moisture with a %HR (Humidity Ratio) analyzer.
- Target Moisture: Aim to reduce the moisture level to 0.02‑0.03 %.
- Thermal Properties: Consider the resin’s melt temperature and thermal stability.
- Trial Run: For a new material, schedule a 2‑3 hour trial and re‑measure the moisture.
2. Selecting the Correct Temperature
Temperature influences both drying speed and material integrity. The table below summarizes the recommended temperature ranges for common plastics:
Polymer Type – Recommended Temperature Range
- Polypropylene (PP): 80‑100 °C
- Polyethylene (PE): 70‑90 °C
- Polycarbonate (PC): 110‑130 °C
- ABS: 80‑95 °C
- Polyester (PET): 120‑150 °C
Related Service
For more details or a free on-site assessment, check out our related service page or get in touch with us.
Frequently Asked Questions
How is the drying time for plastic raw material determined?+
First measure the material’s moisture content, then set the drying time based on trial runs to achieve a target of 0.02‑0.03 % moisture.
What temperature ranges are recommended for different polymers?+
Polypropylene 80‑100 °C, Polyethylene 70‑90 °C, Polycarbonate 110‑130 °C, etc., each polymer has its own recommended range.
What influences the price of a drying system?+
Capacity, energy efficiency, control options, and integration ease affect cost; request a quote from the supplier for specifics.
