Machine Systems

How to Perform Masterbatch and Color Dosing in Plastic Injection Molding?

How to Perform Masterbatch and Color Dosing in Plastic Injection Molding?

BSBotex Engineering Team··6 min read
How to Perform Masterbatch and Color Dosing in Plastic Injection Molding?

Color consistency in plastic injection molding is a key factor for product quality and production efficiency. Masterbatch and color dosing methods are the most reliable ways to achieve the desired shade.

What Is Masterbatch and How to Choose It?

Masterbatch is a highly concentrated mixture of pigments or additives pre‑blended into a polymer matrix. It is added at 1‑5 % during dosing, ensuring uniform color. When selecting a masterbatch, consider:

  • Compatibility with the polymer type (PP, PE, PA, etc.).
  • Thermal stability and heat resistance.
  • Color strength and lightfastness.
  • Supplier quality certificates and test reports.

Reliable suppliers such as Botex System provide masterbatch solutions tailored to your process conditions.

Color Dosing Systems: Manual vs. Automatic

Two main dosing approaches are used:

  1. Manual dosing: Ideal for small‑scale production or prototyping. It requires frequent calibration and carries a higher risk of measurement errors.
  2. Automatic dosing: Utilizes gravimetric, volumetric, or peristaltic pump systems for large‑scale lines. These can adjust dosing with up to ±0.1 % accuracy and continuously monitor the process.

With PLC integration, automatic systems can adjust the color concentration in real time.

Step‑by‑Step Implementation: What to Watch Out For?

Follow these steps to ensure smooth masterbatch and color dosing:

  1. Preparation: Define raw material, masterbatch, and extruder temperature settings. Keep material moisture below 0.02 %.
  2. Calculate Dosing Amount: Determine masterbatch ratio based on desired color intensity (1‑5 %). Formula: (Desired color % × Raw material kg) / Masterbatch % = kg masterbatch.
  3. Calibration: Calibrate the dosing device with a reference scale. Perform a check every 500 kg of production.
  4. Mixing: Introduce masterbatch at the extruder feed zone. Optimize screw geometry and speed for homogeneous mixing.
  5. Monitoring & Adjustment: Use inline spectrophotometers to detect color deviation and automatically update dosing parameters.
  6. Quality Control: Test finished parts according to ASTM D1925. An ΔE value below 2 indicates acceptable color consistency.

Common Issues in Color Dosing

  • Masterbatch absorbs moisture → Check and dry before use.
  • Dosing device loses calibration → Perform periodic recalibration.
  • Extruder temperature fluctuations → Stabilize with PID control.
  • Incorrect pigment selection → Conduct polymer‑pigment compatibility tests.

Related Service

For more details or a free on-site assessment, check out our related service page or get in touch with us.

Frequently Asked Questions

What is the most critical control point in masterbatch color dosing?+

The moisture content of the masterbatch and the calibration of the dosing device are the most critical control points.

What advantages do automatic dosing systems offer?+

They provide ±0.1 % precision, real‑time adjustments, and immediate correction of color deviations during production.

Which standards are used to measure color consistency?+

Standards such as ASTM D1925 and ΔE values (below 2) are commonly used to assess color consistency.

Free On-site Survey

Get a Quote for Your Line

Leave your details and our engineer will call you within 24 hours. The survey is free, no prepayment.

Monday–Friday 09:00–18:00

Your details are only used to contact you.