Powder & Granule Conveying

Pneumatic Conveying Systems: Move Powder and Granules with Air

Pneumatic conveying moves powder and granular material through a closed pipeline using an air stream. We build the whole line with blowers, vacuum filters, silos and loaders; use our Blower Calculator for a first estimate.

What is pneumatic conveying and how does it work?

In a pneumatic conveying system a blower or vacuum pump creates an air stream in the pipeline. Material is fed into the stream, travels along the pipe and is separated from the air by a filter or cyclone at the destination, dropping into a silo, hopper or machine.

There are two basic methods. In vacuum (suction) systems air is drawn through the line; they suit collecting from several points into one destination, and dust cannot escape at leaks. In pressure systems air is blown into the line; they are used for long distances and distribution to several destinations.

There are also two regimes by air velocity and loading: in dilute phase material is carried suspended at high velocity; in dense phase it moves slowly in plugs and is preferred for fragile or abrasive materials. The right regime depends on particle size, density and line length.

Line components

We build the machines used at every stage in our own workshop.

1. Air source

The blower supplies the airflow and pressure needed for the line length and material.

2. Feeding

Material is fed into the line in a controlled way from sacks, big bags or silos.

3. Separation & filtering

At the destination the vacuum filter separates dust from the air and protects the blower and pump.

4. Distribution & machine feeding

The distribution station routes material to the right line and loaders fill the machine hopper.

What do you gain?

  • Closed line: no dust or spillage, a clean work area
  • Horizontal and vertical conveying with flexible routing through bends
  • Less manual handling and forklift traffic
  • Feeding from silos, big bags and sacks on the same line
  • Continuous production with automatic level control

Frequently Asked Questions

Which materials can be conveyed pneumatically?+

Free-flowing powders and granules such as plastic pellets and regrind, PVC and calcium carbonate powders, flour, sugar, grain and cement. Moist, sticky or very coarse materials need a separate assessment.

Vacuum or pressure?+

Vacuum suits collecting from several points into one destination and places where dust leaks are unacceptable; pressure suits long lines and distribution from one source to several destinations. We choose based on your line data.

How far can material be conveyed?+

With our blower systems, depending on the system and pressure capacity, material can be conveyed up to 200 m horizontally and 50 m vertically.

How are airflow and pipe size determined?+

They depend on material, capacity and line length. Our Blower Calculator gives a first estimate; our engineers make the final selection after a site survey.

How We Work

5 Steps from Survey to Start-up

  1. 1

    Free Site Survey

    We visit your plant and review your line and needs on site.

  2. 2

    Engineering

    We design capacity, layout and automation and send a clear quote.

  3. 3

    Manufacturing

    Machines and software are built and tested in our workshop.

  4. 4

    Installation

    We install, commission and train your operators on site.

  5. 5

    Service & Warranty

    2-year warranty, spare parts and remote support.

Free On-site Survey

Get a Quote for Your Line

Leave your details and our engineer will call you within 24 hours. The survey is free, no prepayment.

Monday–Friday 09:00–18:00

Your details are only used to contact you.