Plastic Raw Material Conveying

Central Feeding Systems: Convey Raw Material to Every Machine Automatically

Instead of carrying sacks from machine to machine, convey raw material from one stock point to all your injection and extrusion machines through closed pipelines. We design, build and install every part – from the silo to the machine hopper.

What is a central feeding system?

A central feeding system conveys plastic raw material automatically through pipelines from a central storage area (silo, big bag station or bag opening unit) to the production machines in the plant. Material is moved by vacuum or pressurised air, routed to the right machine at a distribution station and filled into the hopper by a loader at the machine.

Manual handling means carrying sacks to each machine, which wastes time; spilled material causes losses and dust, and putting the wrong material into the wrong machine causes production errors. Central feeding brings these steps into one closed, controlled line.

System components

We build the machines used at every stage in our own workshop.

1. Storage

Raw material is taken from silos, big bags or sacks. Silos act as the central stock point, indoors or outdoors.

2. Conveying

Material travels through a closed pipeline by vacuum or pressurised air. The vacuum filter separates dust and protects the pump.

3. Distribution

The distribution station routes each material to the right machine line and prevents mix-ups between materials.

4. Machine feeding

Material loaders fill the injection or extrusion machine hopper automatically; mixing and dosing can be added at the machine.

What do you gain?

  • No manual handling – lower labour cost and accident risk
  • Closed lines reduce dust, losses and contamination
  • The distribution station prevents wrong-material errors
  • Production floor stays free of sacks and clutter
  • The whole line is monitored and controlled from one point

Frequently Asked Questions

What is a central feeding system?+

A system that conveys plastic raw material automatically through closed pipelines from a central stock point (silo, big bag) to the injection and extrusion machines in the plant, without manual handling.

Central feeding or individual loaders?+

The more machines you have and the more they share the same material, the bigger the benefit of a central system. With only a few machines, individual loaders may be enough. We decide after surveying your plant.

Can it be added to an existing plant?+

Yes. The system is engineered around your layout and existing machines, and its modular design lets you add machines and lines later.

How are the blower and pipe size chosen?+

Airflow, pipe size and pressure depend on the material, capacity and line length. Use our Blower Calculator for a first estimate; our engineers make the final selection.

How We Work

5 Steps from Survey to Start-up

  1. 1

    Free Site Survey

    We visit your plant and review your line and needs on site.

  2. 2

    Engineering

    We design capacity, layout and automation and send a clear quote.

  3. 3

    Manufacturing

    Machines and software are built and tested in our workshop.

  4. 4

    Installation

    We install, commission and train your operators on site.

  5. 5

    Service & Warranty

    2-year warranty, spare parts and remote support.

Free On-site Survey

Get a Quote for Your Line

Leave your details and our engineer will call you within 24 hours. The survey is free, no prepayment.

Monday–Friday 09:00–18:00

Your details are only used to contact you.