Industry

Centralized Raw Material Feeding in Plastic Injection Plants

Centralized Raw Material Feeding in Plastic Injection Plants

BSBotex Engineering Team··6 min read
Centralized Raw Material Feeding in Plastic Injection Plants

In plastic injection factories, controlling the flow of raw material is crucial for production efficiency and quality standards. Centralized raw material feeding systems automate this flow, minimizing line errors and waste. This article details the installation and benefits of such a system through a real‑world plant example.

1. Plant Overview and Current Situation

A mid‑size injection molding plant processes 12,000 tons of raw material annually, producing automotive and packaging components. The line consists of five injection machines and two extruders. The traditional method required manual filling of each machine from separate silos, leading to operator errors, time loss, and inventory imbalances.

2. Design of the Centralized Feeding System

Botex System’s solution links a main silo to the control room via a transport line and smart valves that direct material to each machine. The PLC‑based controller provides real‑time inventory tracking, flow‑rate adjustment, and alarm management. An HMI screen lets operators monitor material levels instantly and intervene manually if needed.

Key Components

  • High‑capacity main silo (30 tons)
  • Stainless‑steel transport pipes and pump station
  • Modular valve blocks (individual machine control)
  • PLC & HMI control panel
  • SCADA integration for data collection

Related Service

For more details or a free on-site assessment, check out our related service page or get in touch with us.

Frequently Asked Questions

What is a centralized raw material feeding system and what benefits does it provide?+

It is a system that automates raw material flow from a single control point, offering higher efficiency, better inventory control, and waste reduction.

How long does the investment payback period typically take for this system?+

Most plants see ROI within 12‑18 months; our example plant achieved payback in 14 months.

Is integration with an existing production line difficult?+

Thanks to its modular design, integration usually completes in 6‑8 weeks without major infrastructure changes.

Free On-site Survey

Get a Quote for Your Line

Leave your details and our engineer will call you within 24 hours. The survey is free, no prepayment.

Monday–Friday 09:00–18:00

Your details are only used to contact you.